UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-Q

(Mark One)

☒ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934.

For the quarterly period ended March 31, 2024

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934.

For the transition period from ____ to _____

Commission file number: 000-19871

MICROBOT MEDICAL INC.

(Name of Registrant in Its Charter)

288 Grove Street, Suite 388

Braintree, MA 02184

(Address of principal executive offices)

(781) 875-3605

(Registrant’s Telephone Number, Including Area Code)

(Former name, former address and former fiscal year, if changed since last report)

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: 14,398,964 shares of Common Stock, $0.01 par value at May 14, 2024.

MICROBOT MEDICAL INC. AND SUBSIDIARY

Index

MICROBOT MEDICAL INC.

Interim Consolidated Balance Sheets

U.S. dollars in thousands

(Except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements.

MICROBOT MEDICAL INC.

Interim Consolidated Statements of Comprehensive Loss

U.S. dollars in thousands

(Except share and per share data)

		2024				2023
		For the Three Months Ended  March 31,
		2024				2023
		Unaudited
Research and development, net		$	(1,169	)		$	(1,617	)
General and administrative			(1,215	)			(1,302	)
Operating loss			(2,384	)			(2,919	)
Financing income, net			13				66
Total Other Income Expenses	13.0	66.0	0	0	0
Net loss		$	(2,371	)		$	(2,853	)
Basic and diluted net loss per share		$	(0.17	)		$	(0.36	)
Basic and diluted weighted average common shares outstanding			14,055,973				8,013,295

The accompanying notes are an integral part of these consolidated financial statements.

MICROBOT MEDICAL INC.

Interim Consolidated Statements of Shareholders’ Equity

U.S. dollars in thousands

(Except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements.

MICROBOT MEDICAL INC.

Interim Consolidated Statements of Cash Flows

U.S. dollars in thousands

The accompanying notes are an integral part of these consolidated financial statements.

MICROBOT MEDICAL INC.

Notes to Interim Consolidated Financial Statements

U.S. dollars in thousands

(Except share and per share data)

Item 2 - Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Forward Looking Statements

The following discussion should be read in conjunction with our unaudited financial statements and related notes included in Item 1, “Financial Statements,” of this Quarterly Report on Form 10-Q, as well as our Annual Report on Form 10-K for the fiscal year ended December 31, 2023. Certain information contained in this MD&A includes “forward-looking statements.” Statements which are not historical reflect our current expectations and projections about our future results, performance, liquidity, financial condition and results of operations, prospects and opportunities and are based upon information currently available to us and our management and their interpretation of what is believed to be significant factors affecting our existing and proposed business, including many assumptions regarding future events. Actual results, performance, liquidity, financial condition and results of operations, prospects and opportunities could differ materially and perhaps substantially from those expressed in, or implied by, these forward-looking statements as a result of various risks, uncertainties and other factors, including those risks described in detail in the section entitled “Risk Factors” of our Annual Report on Form 10-K for the year ended December 31, 2023.

Forward-looking statements, which involve assumptions and describe our future plans, strategies, and expectations, are generally identifiable by use of the words “may,” “should,” “would,” “will,” “could,” “scheduled,” “expect,” “anticipate,” “estimate,” “believe,” “intend,” “seek,” or “project” or the negative of these words or other variations on these words or comparable terminology.

In light of these risks and uncertainties, and especially given the nature of our existing and proposed business, there can be no assurance that the forward-looking statements contained in this section and elsewhere in this Quarterly Report on Form 10-Q will in fact occur. Potential investors should not place undue reliance on any forward-looking statements. Except as expressly required by the federal securities laws, there is no undertaking to publicly update or revise any forward-looking statements, whether as a result of new information, future events, changed circumstances or any other reason.

Overview

Microbot is a preclinical medical device company specializing in the research, design and development of next generation robotic endoluminal surgery devices targeting the minimally invasive surgery space. Microbot is primarily focused on leveraging its robotic technologies with the goal of redefining surgical robotics while improving surgical outcomes for patients.

Using our LIBERTY® Endovascular Robotic Surgical System, we are developing the first ever fully disposable robot for various endovascular interventional procedures.

Technological Platforms

LIBERTY^® Endovascular Robotic Surgical System

On January 13, 2020, Microbot unveiled what it believes is the world’s first fully disposable robotic system for use in endovascular interventional procedures, such as cardiovascular, peripheral and neurovascular. The LIBERTY^® Endovascular Robotic Surgical System features a unique compact design with the capability to be operated remotely, reduce radiation exposure and physical strain to the physician, reduce the risk of cross contamination, as well as the potential to eliminate the use of multiple consumables when used with its NovaCross® platform or possibly other guidewire/microcatheter technologies.

The LIBERTY® Endovascular Robotic Surgical System is designed to maneuver guidewires and over-the-wire devices (such as microcatheters) within the body’s vasculature. It eliminates the need for extensive capital equipment requiring dedicated Cath-lab rooms as well as dedicated staff.

We believe the addressable markets for the LIBERTY^® Endovascular Robotic Surgical System are the Interventional Cardiology, Interventional Radiology and Interventional Neuroradiology markets.

The unique characteristics of the LIBERTY^® Endovascular Robotic Surgical System - compact, mobile, disposable and remotely controlled - open the opportunity of expanding telerobotic interventions to patients with limited access to life-saving procedures, such as mechanical thrombectomy in ischemic stroke.

The LIBERTY^® Endovascular Robotic Surgical System is being designed to have the following attributes:

On August 17, 2020, Microbot announced the successful conclusion of its feasibility animal study using the LIBERTY^® Endovascular Robotic Surgical System. The study met all of its end points with no intraoperative adverse events, which supports Microbot’s objectives to allow physicians to conduct a catheter-based procedure from outside the catheterization laboratory (cath-lab), avoiding radiation exposure, physical strain and the risk of cross contamination. The study was performed by two leading physicians in the neuro vascular and peripheral vascular intervention spaces, and the results demonstrated robust navigation capabilities, intuitive usability and accurate deployment of embolic agents, most of which was conducted remotely from the cath-lab’s control room.

On May 3, 2023, we announced that the LIBERTY® Endovascular Robotic Surgical System has surpassed its 100th catheterization during multiple preclinical studies, with a 95% success rate of reaching pre-determined vascular targets, such as distal branches of hepatic, gastric, splenic, mesenteric, renal and hypogastric arteries. Moreover, all of the procedures were completed without notable signs of intraoperative injury.

On June 29, 2023, we announced the successful completion of a two-day preclinical study held by leading key opinion leaders at a New York-based research lab, where they performed dozens of catheterizations, including the utilization of the LIBERTY^® Endovascular Robotic Surgical System’s remote operation capabilities, to pre-determined vascular targets, with a 100% success rate of reaching the intended target with no observable on-site complications.

In October 2023, we announced the successful initial outcomes from our pivotal preclinical study with the LIBERTY® Endovascular Robotic Surgical System. The pivotal study was conducted by three leading interventional radiologists that utilized the LIBERTY^® Endovascular Robotic Surgical System to reach a total of 48 animal targets. A total of 6 LIBERTY^® Endovascular Robotic Surgical Systems were used in the study. All 6 LIBERTY^® Endovascular Robotic Surgical Systems performed flawlessly, with 100% usability and technical success. No acute adverse events or complications were visually observed intra-operative. In December 2023, we announced that the final histopathology and lab report supplements our previous findings, and that the results of the study will support our IDE submission to the FDA to commence human clinical study. On January 29, 2024, the Company submitted an Investigational Device Exemption (IDE) application with the U.S. Food and Drug Administration, in order to commence its pivotal clinical trial in humans, and as of the filing date of this Quarterly Report on Form 10-Q, we are continuing our interaction with the FDA regarding our IDE submission process.

On October 24, 2023, we announced that we received confirmation for the commencement of the process to support our future CE Mark approval, and to ultimately allow us to market the LIBERTY® Endovascular Robotic Surgical System in Europe as well as other regions who accept the CE Mark. According to the confirmation, we will commence audits for ISO 13485 certification to ensure compliance with the Quality Management System (QMS) requirements of the EU Medical Devices Regulation (MDR 2017/745), during the first half of 2024. We had previously taken the first step to advance our European program by engaging with a leading Notified Body, who recently confirmed dates for conducting the required audits.

The Company currently anticipates receiving 510(k) clearance from the US Food & Drug Administration in the first half of 2025, and CE Mark approval in the second half of 2025.

NovaCross^®

On October 6, 2022, we purchased substantially all of the assets, including intellectual property, devices, components and product related materials of Nitiloop Ltd., an Israeli limited liability company. The assets include intellectual property and technology in the field of intraluminal revascularization devices with anchoring mechanism and integrated microcatheter, and the products or potential products incorporating the technology owned by Nitiloop and designated by Nitiloop as “NovaCross”, “NovaCross Xtreme” and “NovaCross BTK” and any enhancements, modifications and improvements. This technology is also expected to be incorporated in our One & Done® feature.

Israel-Hamas War

On October 7, 2023, the State of Israel, where the Company’s research and development and other operations are primarily based, suffered a surprise attack by hostile forces from Gaza, which led to the declaration by Israel of the “Iron Swords” military operation. This military operation and related activities are on-going as of the filing date of this Quarterly Report on Form 10-Q.

The Company has considered various ongoing risks relating to the military operation and related matters, including:

The Company is closely monitoring how the military operation and related activities could adversely effect its anticipated milestones and its Israel-based activities to support future clinical and regulatory milestones, including the Company’s ability to import materials that are required to construct the Company’s devices and to ship them outside of Israel. As of the filing date of this Quarterly Report on Form 10-Q, the Company has determined that there have not been any materially adverse effects on its business or operations, but it continues to monitor the situation, as any future escalation or change could result in a material adverse effect on the ability of the Company’s Israeli office to support the Company’s clinical and regulatory activities. The Company does not have any specific contingency plans in the event of any such escalation or change.

Financial Operations Overview

Research and Development Expenses, net

Research and development expenses consist primarily of salaries and related expenses and overhead for Microbot’s research, development and engineering personnel, prototype materials and research studies, obtaining and maintaining Microbot’s patent portfolio, net of government grants. Microbot expenses its research and development costs as incurred.

General and Administrative Expenses

General and administrative expenses consist primarily of the costs associated with management salaries and benefits, professional fees for accounting, auditing, consulting, legal services, and insurance expenses.

Microbot expects that its general and administrative expenses will increase over the long-term, even if a period-to-period comparison may show a decrease, as it expands its operating activities, maintains compliance with exchange listing and SEC requirements. Microbot expects these potential increases will likely include management costs, legal fees, accounting fees, directors’ and officers’ liability insurance premiums and expenses associated with investor relations.

Income Taxes

Microbot has incurred net losses and has not recorded any income tax benefits for the losses. It is still in its development stage and has not yet generated revenues, therefore, it is more likely than not that sufficient taxable income will not be available for the tax losses to be fully utilized in the future.

Critical Accounting Policies and Significant Judgments and Estimates

Management’s discussion and analysis of Microbot’s financial condition and results of operations are based on its consolidated financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles, or GAAP. The preparation of these consolidated financial statements requires Microbot to make estimates and judgments that affect the reported amounts of assets, liabilities, and expenses and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements. Microbot bases its estimates on historical experience, known trends and events, and various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ materially from these estimates under different assumptions or conditions.

While Microbot’s significant accounting policies are described in more detail in the notes to its consolidated financial statements, Microbot believes the following accounting policies are the most critical for fully understanding and evaluating its consolidated financial condition and results of operations.

Contingencies

Management records and discloses legal contingencies in accordance with Accounting Standards Codification (“ASC”) Topic 450 Contingencies. A provision is recorded when it is both probable that a liability has been incurred and the amount of the loss can be reasonably estimated. The Company monitors the stage of progress of its litigation matters to determine if any adjustments are required.

Fair Value of Financial Instruments

The Company measures the fair value of certain of its financial instruments on a recurring basis.

A fair value hierarchy is used to rank the quality and reliability of the information used to determine fair values. Financial assets and liabilities carried at fair value will be classified and disclosed in one of the following three categories:

Level 1 - Quoted prices (unadjusted) in active markets for identical assets and liabilities.

Level 2 - Inputs other than Level 1 that are observable, either directly or indirectly, such as unadjusted quoted prices for similar assets and liabilities, unadjusted quoted prices in the markets that are not active, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.

Level 3 - Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

Results of Operations

Comparison of Three Months Ended March 31, 2024 and 2023

The following table sets forth the key components of Microbot’s results of operations for the three month periods ended March 31, 2024 and 2023 (in thousands):

Research and Development Expenses. The decrease in research and development expenses for the three months ended March 31, 2024 compared to March 31, 2023 was primarily due to reduction in payroll due to an increase in vacation utilization, deduction of government grants and decrease in expenses related to the outsourcing of the manufacturing of the Company’s LIBERTY product.

General and Administrative Expenses. The decrease in general and administrative expenses for the three months ended March 31, 2024 compared to March 31, 2023 was primarily due to lower travel expenses in the first quarter of 2024 and lower payroll expenses compared to the comparable period in 2023, offset by increase in stock base compensation due to new option grants and increase in professional services.

Financing Income. The decrease in financing income, net for the three months ended March 31, 2024 compared to March 31, 2023, was primarily due to foreign exchange differences and a decrease in interest income.

Liquidity and Capital Resources

To date, Microbot has not generated revenues from operations. Microbot has incurred losses since inception and negative cash flows from operating activities for all periods presented. As of March 31, 2024, Microbot had a net working capital of approximately $5.8 million, consisting primarily of cash and cash equivalents and marketable securities. This compares to net working capital of approximately $4.1 million as of December 31, 2023. Microbot anticipates that it will continue to incur net losses for the foreseeable future as it continues research and development efforts of its primary product candidate and continues to incur costs associated with being a public company.

Microbot has funded its operations through the issuance of capital stock, grants from the Israeli Innovation Authority, and convertible debt. Since inception (November 2010) through March 31, 2024, Microbot has raised cash proceeds of approximately $69.3 million and incurred a total cumulative loss of approximately $81.9 million.

Microbot Israel obtained from the Israeli Innovation Authority (“IIA”) grants for participation in research and development for the years 2013 through March 31, 2024 in the total amount of approximately $1.9 million. This amount includes amounts received in the first quarter of 2024 of approximately $74,000, which are a portion of an additional grant from the IIA in the amount of approximately NIS 1.6 million (approximately $447,000) approved by the IIA on June 1, 2023, to further finance the development of the manufacturing process of the LIBERTY^® Endovascular Robotic Surgical System. On January 4, 2018, Microbot Israel entered into an agreement with CardioSert to acquire certain of its patent-protected technology, which we expect to return shortly. CardioSert received grants from the IIA in the aggregate amount of approximately $530,000 and Microbot Israel took over the liability to repay such grants, although we expect that we will cease to have any obligations under the CardioSert grants once that technology is returned. On October 6, 2022, Microbot Israel entered into an agreement with Nitiloop Ltd. to acquire substantially all of its assets. Nitiloop received grants from the IIA in the aggregate amount of approximately $925,000 and Microbot Israel took over the liability to repay such grants.

Microbot Israel is obligated to pay royalties amounting to 3%-5% of its future sales up to the amount of the grants. The grants are linked to the exchange rate of the dollar to the New Israeli Shekel and bears interest at an annual rate of SOFR, a benchmark interest rate which replaced LIBOR. Under the terms of the grants and applicable law, Microbot is restricted from transferring any technologies, know-how, manufacturing or manufacturing rights developed using the grant outside of Israel without the prior approval of the Israel Innovation Authority. Microbot has no obligation to repay the grants, if the applicable project fails, is unsuccessful or aborted before any sales are generated; accordingly, as we have discontinued the CardioSert program and are returning the technology to CardioSert, we do not expect to repay, or have the obligation to repay, the grants relating to that technology. The financial risk is assumed completely by the IIA.

On March 2, 2023, the Company announced that it received approval for a grant from the Ministry of Economy in the amount of approximately NIS 300,000, which based on an exchange rate on such date of NIS 1.00 = $0.2923, would be approximately $88,000, to further finance the marketing activities of the LIBERTY^® Endovascular Robotic Surgical System in the U.S. market.

In relation to the Ministry of Economy grant, the Company is obligated to pay royalties amounting to 3% of future sales of the LIBERTY^® Endovascular Robotic Surgical System up to the grant amount plus interest.

During the second fiscal quarter of 2023, Microbot commenced a core-business focus program and a cost reduction plan while it sought to raise sufficient additional capital to continue development of the LIBERTY^® Endovascular Robotic Surgical System. In May and June 2023, Microbot raised aggregate gross proceeds of approximately $7.6 million, before fees and expenses of approximately $1.1 million, from investors, to continue to fund its operations and research and development activities and will need additional funds to continue the FDA approval process for the LIBERTY^® Endovascular Robotic Surgical System. We also raised approximately $2.7 million in gross proceeds, before fees and expenses of approximately $333,000, from financing activities in January 2024. To the extent available, Microbot intends to raise capital through future public and private issuances of debt and/or equity securities. The capital raises from issuances of convertible debt and equity securities could result in additional dilution to Microbot’s shareholders. In addition, to the extent Microbot determines to incur additional indebtedness, Microbot’s incurrence of additional debt could result in debt service obligations and operating and financing covenants that would restrict its operations. Microbot can provide no assurance that financing will be available in the amounts it needs, at the times it needs it or on terms acceptable to it, if at all.

Management believes we have sufficient funds for our operations for less than one year. As a result of the foregoing and our current cash position, these conditions raise substantial doubt about Microbot’s ability to continue as a going concern, which could adversely affect our ability to raise capital, expand our business and develop our planned products. The accompanying consolidated interim financial statements do not include any adjustments to reflect the possible future effects on recoverability and reclassification of assets or the amounts and classification of liabilities that may result from the outcome of this uncertainty.

Cash Flows

The following table provides a summary of the net cash flow activity for each of the periods presented (in thousands):

The decrease in 2024 in net cash flows from operating activities was primarily from a decrease in research and development expenses relating to the LIBERTY^® Endovascular Robotic Surgical System as a result of the Company’s May 2023 cost reduction plan and core-business focus program.

The decrease in 2024 in net cash flows from investing activities was mainly due to an increase in the acquisition of marketable securities.

The increase in 2024 in net cash flows from financing activities was due to the Company’s raising of capital pursuant to its warrant reset offering which closed in January 2024.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

Interest Rate Risk

Microbot’s cash and cash equivalents as of March 31, 2024 consisted of readily available checking and money market funds. Microbot’s primary exposure to market risk is interest income sensitivity, which is affected by changes in the general level of U.S. interest rates. However, because of the short-term nature of the instruments in Microbot’s portfolio, a sudden change in market interest rates would not be expected to have a material impact on Microbot’s financial condition and/or results of operations. Microbot does not believe that its cash or cash equivalents have significant risk of default or illiquidity. While Microbot believes its cash and cash equivalents do not contain excessive risk, Microbot cannot provide absolute assurance that in the future its investments will not be subject to adverse changes in market value. In addition, Microbot maintains significant amounts of cash and cash equivalents at one or more financial institutions that are in excess of federally insured limits.

Foreign Exchange Risks

Our financial statements are denominated in U.S. dollars and financial results are denominated in U.S. dollars, while a significant portion of our business is conducted, and a substantial portion of our operating expenses are payable, in currencies other than the U.S. dollar.

Exchange rate fluctuations may have an adverse impact on our future revenues, if any, or expenses as presented in the financial statements. We may in the future use financial instruments, such as forward foreign currency contracts, in its management of foreign currency exposure. These contracts would primarily require us to purchase and sell certain foreign currencies with or for U.S. dollars at contracted rates. We may be exposed to a credit loss in the event of non-performance by the counterparties of these contracts. In addition, these financial instruments may not adequately manage our foreign currency exposure. Our results of operations could be adversely affected if we are unable to successfully manage currency fluctuations in the future.

Effects of Inflation

Inflation generally affects Microbot by increasing its research and development expenses. Microbot does not believe that inflation and changing prices had a significant impact on its results of operations for any periods presented herein.

Item 4. Controls and Procedures.

Disclosure Controls and Procedures

We maintain a system of disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act). As required by Rule 13a-15(b) under the Exchange Act, management of the Company, under the direction of our Chief Executive Officer and Chief Financial Officer, reviewed and performed an evaluation of the effectiveness of design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) as of March 31, 2024. Based on that review and evaluation, the Chief Executive Officer and Chief Financial Officer, along with the management of the Company, have determined that as of March 31, 2024, the disclosure controls and procedures were effective to provide reasonable assurance that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and were effective to provide reasonable assurance that such information is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosures.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal control over financial reporting, identified in connection with the evaluation of such internal control that occurred during our last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

PART II

OTHER INFORMATION

Item 1. Legal Proceedings.

From time to time, we may become involved in various lawsuits and legal proceedings, which arise in the ordinary course of business. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm business.

Settlement of Lawsuit

As of January 26, 2024 (the “Effective Date”), we entered into a Settlement Agreement and Release (the “Settlement Agreement”) with Empery Asset Master Ltd., Empery Tax Efficient, LP, Empery Tax Efficient III, LP and Hudson Bay Master Fund Ltd. (collectively, “Plaintiffs”), which resolved and settled the below referenced litigation between the Company and Plaintiffs. The Company previously announced that it was a defendant in a lawsuit captioned Empery Asset Master Ltd., Empery Tax Efficient, LP, Empery Tax Efficient II, LP, Hudson Bay Master Fund Ltd., Plaintiffs, against Microbot Medical Inc., Defendant, in the Supreme Court of the State of New York, County of New York (Index No. 651182/2020) (the “Lawsuit”), pursuant to which the Plaintiffs alleged, among other things, that the Company breached multiple representations and warranties contained in the Securities Purchase Agreement (the “SPA”) related to the Company’s June 8, 2017 equity financing (the “Financing”), of which the Plaintiffs participated, and fraudulently induced Plaintiffs into signing the SPA. The complaint sought rescission of the SPA and return of the Plaintiffs’ $6.75 million purchase price with respect to the Financing.

Pursuant to the Settlement Agreement, the Company paid Plaintiffs an aggregate of $2,154,000 (the “Total Settlement Amount”), consisting of a cash payment covered by the Company’s insurance carrier of $1,100,000 and 1,005,965 shares of restricted Company common stock (the “Shares”), which Shares represent the whole number of restricted shares of Company common stock calculated pursuant to the following formula: $1,054,000/[closing price of Company common stock on the Effective Date * 0.825]. Additionally, the Plaintiffs and the Company each agreed to fully release the other from all claims arising out of the Financing, the SPA and/or the allegations and claims asserted in the Lawsuit, subject to customary carve-outs.

In February 2024, the Plaintiffs filed a stipulation discontinuing the Lawsuit with prejudice.

We also agreed, pursuant to a Registration Rights Agreement (the “Registration Rights Agreement”), to file a registration statement on Form S-1 or Form S-3 covering the resale of the Shares (the “Resale Registration Statement”), within 30 calendar days following the Effective Date, and to use reasonable best efforts to have such Resale Registration Statement declared effective by the SEC within 60 days (or, in the event of a “full review” by the Securities and Exchange Commission, within 90 days) following the Effective Date. We shall be required to make cash payments to the Plaintiffs in the event we fail to register the Shares and keep the Resale Registration Statement effective pursuant to the terms of the Registration Rights Agreement, and if we fail to remove the restrictions on the Shares pursuant to the terms of the Settlement Agreement.

Other Legal Proceedings

See also “Note 3.H. Mona Litigation:”, to the financial statements included earlier in this Quarterly Report on Form 10-Q.

Other than the foregoing, we are not currently a party in any legal proceeding or governmental regulatory proceeding nor are we currently aware of any pending or potential legal proceeding or governmental regulatory proceeding proposed to be initiated against us, in any case that would have a material adverse effect on us or our business.

Item 1A. Risk Factors.

Not required for a smaller reporting company.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.

None.

Item 3. Defaults Upon Senior Securities.

None.

Item 4. Mine Safety Disclosures.

Not applicable.

Item 5. Other Information.

During the three months ended March 31, 2024, no director or officer, as defined in Rule 16a-1(f) under the Securities Exchange Act of 1934, as amended, of the Company adopted or terminated a “Rule 10b5-1 trading arrangement” or “non-Rule 10b5-1 trading arrangement,” as each term is defined in Item 408(a) of Regulation S-K.

Item 6. Exhibits

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, this 15^th day of May, 2024.